[ad_1]
Sleeve anchors are fasteners used to secure objects to concrete or masonry structures. They consist of a metal screw or stud with a cone-shaped tip that flares out to the sides and a metal sleeve that wraps around the pin. The installation process involves drilling a hole, removing debris, inserting the anchor, and tightening it with a wrench. The weight of the object and the condition of the concrete must be considered when choosing the appropriate anchor bolt.
A sleeve anchor is a type of fastener used to secure objects to a concrete or masonry structure. They can be used to join two or more concrete structures, or to secure an item such as a shelf to a brick wall. Sleeve anchors are also referred to as two stage bolts or anchor bolts in some areas.
The sleeve anchor consists of a solid metal screw or stud with a cone-shaped tip that flares out to the sides. A metal sleeve wraps around the outside of the pin, allowing the tip of the pin to extend out the end of the sleeve. A washer and nut are located on the top of the bolt for adjustment and installation. Once the sleeve anchor has been driven into the concrete, installers turn the nut to pull the pin into the sleeve. As the flared end of the post passes into the sleeve, it causes the sleeve to expand outward and grip the cement for a secure hold.
Installation of the sleeve anchor is a two-step process. First, the installer must drill a hole in the concrete using a hammer drill. The hole should be the same diameter as the bolt, but is often slightly longer than the bolt to allow for proper installation. The installer then uses a wire brush and vacuum cleaner to remove any concrete or masonry debris from the hole to ensure the bolt fits properly. Any debris left in the hole could impair the sleeve anchor’s ability to grip the concrete or brick.
The installer then inserts the anchor into the hole and tightens it with a wrench. Depending on the manufacturer, the anchor bolt may require a specific number or turns to ensure it has been fully expanded. In some heavy-duty applications, manufacturers recommend using a torque wrench to apply a specific amount of force during installation.
Anchor bolts must be chosen carefully based on the condition of the concrete and the weight of the object. Old or damaged concrete or brick requires heavier or longer sleeve anchors than a well-constructed new concrete structure. The heavier the object to be secured, the longer and thicker the anchor bolt will need to be to provide adequate support. Installers must also take into account any vibration or external forces that may be applied to the bolt. When anchor bolts are used outdoors or near corrosive chemicals, they must be zinc plated to prevent rust or corrosion.
[ad_2]