[ad_1]
The lathe bed is the machine frame that keeps the lathe level and stable. Made of heavy steel, it extends from the headstock to the tailstock and has bed rails for tool storage and measurement. It can be adjusted for vertical turning and has threaded rods for automatic components. Keeping the bed clean and oiled is important for smooth operation.
A lathe bed is the area of the lathe that spans the distance from the headstock to the tailstock and is positioned below the work area. Often referred to as the machine frame, the lathe bed is a very important component of the lathe and is responsible for keeping the equipment level and stable. Made from heavy steel, the bed is hardened to prevent scratching and damage when the different components are tightened into place along the bed rails. Often considered the most basic component of the lathe, the lathe bed is actually the genesis of all turning projects, with accurate squaring and measurements depending on the strength and accuracy of the bed construction.
While the most common lathe design is of a horizontal machine, many models offer an adjustable lathe bed that can be set up for vertical turning as well. In most lathe models, the drive motor is positioned at one end of the machine with the bed extending out and away from the motor assembly and the tailstock mounted on the opposite end of the bed. Storage racks for tools and a wide range of accessories can be found on the full length bed rails. A very important function of bed rails is to provide a perfectly flat and evenly spaced surface from which to measure a part.
Many lathes have threaded rods and screws that run the length of the lathe bed to drive self-actualized or automatic components back and forth along the distance of the workpiece. Once properly adjusted, the operator is able to engage a drive unit and allow the tool to proceed over the workpiece at the correct speed to produce the best results. This can eliminate uneven depth of cut and avoid rough and uneven surface finishes caused by alternating tool speeds. This feature is considered to be very useful when completing tasks such as finishing cuts, knurling and creating fine stitches.
It is important to keep the bed of the lathe clean and free of debris so that the tool can slide smoothly on the frame rails without snagging or jerking. On a wood lathe, maintaining a clean bed with a soft bristle brush and a compressed air nozzle is often sufficient. Metal lathes often require a little more cleaning to remove any loose metal chips that settle in the machining of the various holders and holders on the bed of the lathe. A light coat of oil keeps everything running smoothly.
[ad_2]