[ad_1]
A laser operator installs, adjusts, maintains, and repairs machines that use lasers to cut materials to specifications. They program the machine, inspect the products, and communicate with co-workers and supervisors. Maintenance and replacement of parts are also part of their job.
A laser operator is responsible for a machine that uses a laser to cut products to certain specifications, usually in fabrics and materials such as plastic and wood. These operators are responsible for installing the machine, adjusting it as needed, and carrying out any maintenance or minor repairs that may be required. Laser operators must also be able to communicate well with supervisors and co-workers.
Machine setup is part of a laser operator’s job and can be a complicated process. Machines must be programmed with the proper specifications and controls such as heating elements, speeds and voltages must be adjusted. Operators meet given specifications and program the machine to produce the desired result. In textiles this would include cutting the fabric to the proper length, style and material. Once cut, it is the job of the laser operator to inspect the manufactured products and ensure that each one meets specifications.
Machines may need to be adjusted while products are being manufactured. A laser operator may need to adjust the programming or another element such as speed to ensure the machine is working properly. When a machine needs to be adjusted, the laser operator runs a test run to ensure the settings are correct before continuing with the job. Laser operators take great care to meet specifications and avoid waste or a product that wasn’t manufactured correctly.
Regular maintenance is necessary and part of an operator’s job. Every company has its own schedule for routine maintenance. The operator will clean the machines, oiling and lubricating the parts that need it. Operators can use air hoses, grease guns, rags, oil cans or cleaning solutions to maintain their machines.
The laser operator’s job is to ensure that worn or defective machine parts are replaced. Using hand tools, the operator will replace gears, chains, cutters or any other parts that need replacing. Operators install, align and level new components. An operator will need to install a machine’s rollers or guides and place the thread, fabric or yarn in the appropriate location. Occasionally, there may be a problem with the machine that a laser operator cannot resolve, and someone from the company that manufactured the machine may need to be called in to make repairs.
All laser operators must be able to communicate. It is important for a laser operator to talk to co-workers about work assignments and the machine. Supervisors need to be informed if there is a problem and they are also the ones giving instructions. Operators will record for the supervisor and for the next shift all information about their machine settings and the work completed during each shift.
[ad_2]