[ad_1]
Water clocks were used to measure time, with examples dating back to 4000 BC. They were classified as inflow or outflow and were used for astrological observations and measuring time during events. The accuracy could be adjusted, but they were eventually replaced by more precise timekeeping devices during the age of exploration.
A water clock is a timekeeping device that uses a stream of water to measure time. It’s not as accurate as most modern timekeeping devices, but when these watches were first developed, they were quite adequate for the times. They are believed to be among the oldest devices used to keep time, as written accounts of them date back to around 4000 BC, with physical examples from Egypt dating back to 1500 BC
There are several ways a water clock can work, but generally such clocks are classified as either inflow or outflow. An outflow clock keeps time by allowing the water to flow out slowly; an example from antiquity was a bowl marked with lines that had a small hole in the bottom. The bowl was filled and slowly drained, and lines were used to keep track of the time. In the case of an inflow clock, the flow of water into a container such as a cylinder is used to measure the passage of time.
Water clocks may have originally been developed for the purpose of making astrological observations, when the passage of time may become an important factor. They were also apparently used to measure the passage of time during speeches and other events. The origins of this technology are not known, although Egypt appears to have some of the oldest examples; they were also used in Asia, the Middle East and Greece, where the clock was known as an hourglass, or “water thief”.
The accuracy of a watch could be adjusted by putting water under pressure or by using various tools to alter the rate of flow. Some became quite sophisticated, turning into elaborate clock towers. As other timekeeping devices emerged, the technology began to be replaced, and water clocks today are largely a curiosity, rather than a usable timepiece, thanks to the fact that more precise methods of measuring time have been developed. time.
The need for more accurate watches began to emerge during the age of exploration when mariners urgently needed accurate watches so that longitude could be measured. During this era, more accurate and reliable clocks began to be developed, and with the advent of the Industrial Revolution, as the need to keep accurate time became even more important, even better clocks were developed. By the 19th century, the water clock had largely been phased out, although it continued to be used in some remote areas where the rhythms of the day did not need to be set so precisely.
[ad_2]