[ad_1]
The lag factor is a ratio used in chemistry to measure the distance traveled by a compound compared to a liquid solvent. It is used in thin layer chromatography and groundwater monitoring. The lag factor can be used to track the movement of substances and contaminants and is used in various sample analysis techniques.
The lag factor is a ratio often used in chemistry. Typically used in chromatographic applications, it is generally expressed as the ratio of the distance traveled by a compound to that of a liquid solvent. The substances being measured can be identified by the use of light, which exposes the substances in a solution mixed with a dye. The compound distance is usually divided by the solvent distance when calculating the lag factor. Derived values often depend on the nature of the solvent; moisture content, grain size and substrate thickness; how much material is being analyzed, as well as the temperature.
Thin layer chromatography (TLC) is an application where the lag factor is used. The value can then be included in the calculation of the Retention Factor (Rf) of a sample, which typically ranges from 0.0 to 1.0. Proteins are often classified this way, but a specific compound can have a different Rf depending on the level of moisture or solvents in the mix. With TLC, samples are often placed at the bottom of a glass, plastic or aluminum plate during the stationary phase. The plate is then added to a solvent in a stage called a mobile phase and the rate at which the sample is moving can then be calculated.
Chemical compounds in groundwater are also often monitored using the lag factor. The rate of movement of groundwater is compared to the movement of contaminants as a ratio. The chemistry, the nature of the soil and the chemical reactions that take place in the process influence the delay factor. Processes such as sorption, in which substances separate from solution and concentrate in a material, such as soil, can also affect that movement. In water monitoring, this can cause contaminant levels in soil to rise, while falling in a given water sample.
Volumes of water are often sampled in laboratories using retention factor estimates and other variables. These can be calculated mathematically and then plotted on a graph to compare the behavior of one concentration to another aspect to identify trends. Depending on the method used, specific sample sizes may be required. Soil is often analyzed this way and costs can vary depending on the sample and what contaminants may be present.
The lag factor is used in various applications, such as column chromatography and other sample analysis techniques. It can be used to track the movement of substances, contaminants and single molecules. Solvents moving through the cellulose fibers in the paper can also be measured.
[ad_2]