[ad_1]
A fireplace installer sets up prefabricated fireplaces in homes, attaching wiring and gas lines. They may also build supporting structures and install wood-burning fireplaces, taking additional safety measures. The modern fireplace is usually a manufactured unit that operates on natural gas or liquid propane.
A fireplace installer is a person who installs prefabricated fireplaces in homes. The actual structural component that houses the fireplace is typically not constructed by the fireplace installer. After builders finish basic construction of the system’s structural component, the fireplace installer is responsible for setting the fireplace unit into the frame and attaching all related wiring and gas lines. Once the fireplace is correctly positioned in the frame, the installer applies the mantle and any trim to complete the installation. Occasionally the installer will be asked to install a fireplace in an existing room or building, in which case the installer may also build the entire supporting structure.
Unlike fireplaces required to heat and cook meals within a building, the modern fireplace is usually a manufactured unit that operates on natural gas or liquid propane (LP) gas. Made from metal components, the fireplace is usually installed inside a wooden frame that is built to resemble a fireplace and chimney within a room. The unit is assembled in place by a fireplace installer who is skilled in the installation procedure. The unit is connected to the building’s electrical system so that the fans, blowers and ignition systems can be easily operated by the owner.
On some fireplace models, the units use a ventless type of gas log. This does not require the external ventilation to be assembled and put into operation by the fireplace installer. In other types of fireplaces, the fireplace installer needs to assemble a metal vent pipe or chimney running from the fireplace through a simulated chimney structure to the roof top of a building or home. Generally, the installer attaches all of the gas lines to the fireplace and tests the unit for gas leaks. The installer will also test the efficiency of the exhaust pipe venting using smoke from a burnt paper to verify that smoke is being drawn into and up the vent pipe.
Occasionally, the fireplace installer will be asked to install a wood burning fireplace in a building. When this type of installation is performed, the installer is responsible for several additional security measures. The installer should use fireproof caulking to seal all gaps in the fireplace frame as well as the chimney flue. A damper should also be installed on the chimney pipe to allow the user to adjust the rate of fire burning.
[ad_2]