What’s a Roll Center?

The center of roll is a line around which a vehicle rotates, and its position changes depending on the vehicle’s suspension and center of mass. Engineers use this information to predict vehicle performance and make safety improvements, such as changing suspension systems or lowering the center of mass. A center of roll is a line […]

What’s a roll bender?

A roll bender uses opposing rollers to bend pipes and tubes without deforming the cross section. The correct bender depends on material thickness, width, and tolerances, as well as desired minimum diameters and production runs. The size of the bend rolls is determined by the yield strength ranges of the material and the force required […]

Types of roll cage padding?

There are two types of roll cage padding: SFI safety padding and non-certified padding. The better-designed SFI-rated padding should be used in critical areas near the driver, while non-certified padding can be used in non-critical areas. The FIA-8857-2001 Type A roll cage pad is a revolutionary design that disperses forces over a wider area and […]

What’s roll cutting?

Roll slitting is an industrial process that cuts a coiled roll of material into smaller rolls using a crosscut blade. It is cost-effective and customizable for different projects. The equipment can handle soft and hard materials and achieve high accuracy with minimal waste. Outsourcing and renting options are available for small businesses. Consider the size […]

What’s Roll Compacted Concrete?

Roll Compacted Concrete (RCC) is a dry mix of cement, aggregate and water that generates less heat during curing. It can be used for large castings and paving due to its lack of collapse and ability to support weight soon after being poured. Roll Compacted Concrete (RCC) is a relatively dry mix of cement, aggregate […]

What’s a roll cage?

A roll cage is a safety feature installed on vehicles used in high-risk environments, such as racing, military, and law enforcement. It protects occupants by preventing intrusion into the passenger compartment, but may not offer enough protection in serious accidents. Roll cages can be integrated into the vehicle structure or installed as a modification, and […]

What’s a roll bar?

A roll bar distributes torque across a vehicle’s suspension and chassis, aiding in cornering traction and control. It helps keep the vehicle stable and level during turns, and can also maintain traction during rapid acceleration. The anti-roll bar applies weight and traction to both sides of the vehicle during cornering, equalizing tire wear and improving […]

Install roll bar bushings: how-to?

Replacing sway bar bushings is easy if prepared properly. Loosen mounting straps, remove old bushings, clean the bar, apply petroleum jelly, and slide new bushings on. For some high-performance bushings, the entire bar must be removed. Changing sway bar bushings is a relatively easy task as long as they have been properly prepared before installing […]

What’s a 3 Roll Mill?

A three-roll rolling mill is used to process various products, from pastas to pharmaceuticals. It has three rollers that rotate at increasing speeds and can be equipped with heating and cooling. The device can be rented, leased, or bought new or used. Safety precautions should be taken when operating the mill. A three-roll rolling mill […]

What’s a prawn roll?

Prawn rolls are a popular Australian dish, but variations exist globally. They can be served cold or fried, with different toppings and dipping sauces. Prawns are often confused with crayfish due to their similarities, but differ in size and gill type. Recipes for prawn rolls include a cold sandwich or deep-fried wrap, with various ingredients […]

What is the Rock and Roll Hall of Fame?

The Rock and Roll Hall of Fame, designed by IM Pei, is a museum in Cleveland, Ohio, dedicated to the history of rock and roll. It features seven floors of exhibits and artifacts, including a permanent collection honoring inductees, and generates over $100 million annually for the local economy. Designed by noted architect IM Pei, […]

What’s a Vietnamese Egg Roll?

Vietnamese egg rolls are thinner and lighter than Chinese or American varieties, often made with wonton or spring roll wrappers and filled with ground chicken, pork, shrimp, or crab and vegetables like cabbage, jicama, and carrots. Wrappers are soaked, filled, and fried for about four minutes per side. Vietnamese egg rolls, called cha gio by […]

Skip to content