Deburring tools vary depending on the material and component, with vibrating drums and abrasive media being common for metal objects. Deburring removes small surface imperfections called burrs, which can be cosmetic or necessary for further machining. Vibrating beakers and media blasters are common for mass production, while wire wheels, edgers, files, and abrasive cloths are portable and hand-held. Specialized drill bits can deburr the inner surfaces of pipes.
Because there are a wide variety of different materials and components that require deburring, there are many different types of deburring tools. A common deburring process for metal objects involves placing components inside a vibrating drum with abrasive means. Another method of large-scale deburring is to use an abrasive medium to blast objects. Other deburring tools, such as sanders, files and picks, are portable. Highly specialized drill bits can also be used to deburr the inner surface of pipes.
The deburring process involves removing small surface imperfections from a variety of different workpieces. These small protrusions are often called burrs. Burrs can be the result of the casting process, although they can exist for other reasons as well. Deburring is sometimes cosmetic, but it can also be necessary before a part can be further machined, as is the case with electroplating, which requires a smooth, even surface. Deburring tools can be pretty much anything that is used to remove surface imperfections from workpieces.
A common type of deburring tool is the vibrating beaker. This is a device that typically consists of a barrel and a motor that can make it tumble or shake. To use this type of deburring tool, the workpieces are placed inside along with an abrasive medium. The abrasive medium can then be vibrated against the pieces as the barrel is rotated or agitated, which can remove any burrs. Media blasters are a similar class of deburring tools that can work on many pieces at once by wetting them with abrasive media.
Other types of deburring tools typically work on one piece at a time. These tools are less commonly used in mass or mass production, although they may be necessary in some cases. Wire wheels are a type of deburring tool that can be electrically or pneumatically powered. The item to be deburred is typically held against the spinning wheel to abrade surface imperfections. Edgers can be used in the same way, although some grinding wheels are portable.
Files, sandpaper, and abrasive cloths are other deburring tools that can be hand-held. Tools like these can be used for delicate finishing work, as the material abrasion from the workpiece is typically slower and therefore easier to control. There are also special deburring tools that can clean the inside surfaces of pipes and tubes. These are often wire brushes or hand-operated files, although special bits can be used in conjunction with drills.
Protect your devices with Threat Protection by NordVPN
