A compressor hose carries air from the storage tank to an air tool or nozzle. It is made of reinforced rubber and can withstand high pressure. Maintenance involves avoiding bends, pinches, and kinks. A hose reel can prevent damage, and fittings must match existing ones.
A compressor hose is a device used to carry air from the storage tank of an air compressor to the air tool or nozzle used. Typically made of reinforced rubber, compressor hose is usually designed to withstand great pressure without bursting. Many hoses are made with either nylon or steel reinforcing tape, depending on the amount of pressure the hose is designed to withstand. Some compressor hoses intended for use in a garage or shop are covered in a special rubber compound designed to resist and resist oil. This makes the hose last longer, easier to clean, and less prone to soiling other items it may come into contact with.
An air compressor is of no help without the assistance of an air compressor hose. The hose is typically connected to the compressor’s air tank via a quick coupling. This spring loaded coupling allows the operator to remove or replace tubing by simply sliding a round collar away from the tubing and pushing the tubing into the fitting. Once in, the collar is released and the spring slides it forward, effectively securing the compressor hose to the tank. A similar connector is used at the opposite end of the hose to connect to air tools and inflation nozzles.
There is very little in the line of maintenance that is required for the compressor tube other than wiping the outside with a clean cloth. The leading cause of problems with an air hose is bends, pinches, or kinks in the hose. This can damage the inner belt and lead to a puncture and subsequent leakage. Care should also be taken to avoid stepping on or running over the air hose with vehicles, hydraulic floor jacks, and wheeled shop stools. This type of damage can often be seen in the early stages of failure as a bulge in the pipe.
Garage accessories, such as a hose reel that allows the user to reel air hose back onto a reel when it’s not in use, can often save the hose from potential damage. This type of reel commonly incorporates a swivel fitting on the reel which allows the air hose to stay in motion while preventing the hose from kinking or developing an air leak. Not all air hose fittings are created equal, so when buying fittings for a compressor hose, it’s crucial that the fittings match those you already have.
Protect your devices with Threat Protection by NordVPN
