[ad_1]
Flush hinges fit inside a pocket cut into the door and frame, allowing the hinge plates to sit flush with the surface. They eliminate gaps between the door and frame, creating a clean look. However, they are difficult to install and less strong than standard hinges.
A flush hinge is a type of special hardware used to hang a door. Unlike standard butt hinges, flush hinges are designed to fit inside a pocket cut into the door and frame, which allows the surface of the hinge plates to sit flush with the surface of the door or frame. This type of design allows the door to sit completely flush against the frame, rather than remaining in the standard offset position. Flush hinges are also known as recessed or recessed hinges.
Like standard hinges, flush hinges are available in both rectangular and rounded shapes. Those with square edges are generally easier to install than rounded ones. When buying hinges, it is important to match the hinge to the weight and dimensions of the cabinet door. A hinge that is too small or not strong enough to hold the door will result in poor performance over time. The hinges should also be chosen in finishes that match other hardware and fixtures within the kitchen.
Installing a flush hinge is much more difficult than installing a standard surface mount hinge. Instead of simply bolting the hinge to the surface of the door and frame, installers have to cut a pocket in the door to accommodate the hinge before screwing it into place. This is traditionally made using a simple hammer and chisel, although this method requires some woodworking skill. Modern installers can simply use a special hinge pattern to drive a wood router to make these cuts. Some cabinets and doors may also be set up for flush hinge installation.
The main benefit of using a flush hinge is that it eliminates any gaps between the door and the frame. These two components sit flush against each other, creating a clean, seamless look that may be preferable to some homeowners. By recessing the hinge into the door body, installers can also leave more space available for storage within the cabinet.
Despite their advantages, flush hinges aren’t necessarily the best choice for all users. The biggest disadvantage of the flush hinge is that the installer must be able to cut a pocket in both the door and the frame. This can be very difficult to do correctly using a chisel, and not all novice installers have access to the templates and routers needed to speed up this process. Flush hinges also tend to be less strong than standard hinges and cannot be used on very heavy doors. These hinges typically come in fewer designs and finishes, leaving buyers with fewer options.
[ad_2]