A Sawzall is a versatile reciprocating saw used for construction and DIY projects. Choosing the right blade is important for different materials. Use an anchor when cutting wood and lubricate metal. Turn off electricity when using it for home repairs. Sharpen the blade for cleaner cuts and store it without the blade. Have it serviced every six months.
A Sawzall® is a powered reciprocating saw that is used for major construction work or home projects. A reciprocating saw can be corded or cordless, making it a universal tool for many small and large jobs. They are simple to use, making them a great asset for the average DIY homeowner.
When choosing a blade for your Sawzall®, you must first consider the material you are cutting. A fine-toothed blade is used to cut metal and smooth wood. Use a coarse blade if you’re working with rough woods. If the wrong blade is used for the job, the material can be burned and the reciprocating saw damaged.
The blade is installed on the Sawzall® by lifting the release lever on the blade clamp. Insert the blade into the saw, stem-side first. The blade is locked in place by pressing the blade clamp release lever.
When cutting wood, use an anchor to secure it in place and prevent it from slipping. If you’re cutting metal, lubricate it with a thin coat of oil to prolong the use of the saw blade. Secure the wood to the underside of the metal to prevent it from bending or tearing during the cutting process.
A Sawzall® is often used to mend things around the house. When doing this type of work, it is recommended that you turn off the electricity in your home and use a cordless jigsaw. This will prevent electrocution if you accidentally cut a wire.
Sharpening a Sawzall® blade results in a cleaner cut. This can be done by holding the blade, teeth up, in a vice. Use a flat saw file to cut off the top of the blade teeth until they are even in height. Sharpen the teeth of the blade to a point by running a three-square saw file between each individual tooth.
When the Sawzall® is not in use, remove the blade and place it in the case. Moisture can damage the electrical components of the reciprocating saw. Storing the reciprocating saw with the blade in place can result in damage to the saw or injury to an unexpected person.
Every six months, take your reciprocating saw to a tool service center to have it inspected, cleaned, and lubricated. This will prolong the life of the power tool. The trigger switch on this device tends to get stuck when it becomes clogged with debris, causing choppy movement.
Protect your devices with Threat Protection by NordVPN
