What’s a sink key?

Print anything with Printful



A sink wrench is a tool used by plumbers to install or remove water lines under sinks. It consists of a long metal bar with a jaw on one end and a grip on the other. The jaw operates on a cam and can be reversible. It allows plumbers to reach tight areas and comes in various lengths and sizes. The main body consists of a cylindrical metal rod with a cam jaw and a grip on the other end. Some designs have a sliding T-bar for additional leverage.

A sink wrench is a tool that can be used to tighten or loosen hard-to-reach fasteners. The name comes from the fact that plumbers can use them to install or remove water lines or other components under sinks, although they can be used in a wide variety of other applications. Sink wrenches usually consist of a long metal bar with a jaw on one end and some type of grip, or other method of gaining leverage, on the other. The jaw operates on a cam so it will naturally lock when the key is turned. In many cases, a sink wrench will have a reversible jaw so that the same tool can be used to both loosen and tighten connections.

In many cases, it’s difficult to reach water lines and other connections under a sink. Typical sink installations involve cramped spaces that can make it difficult for a plumber to physically reach a fastener, let alone use a conventional socket wrench. A sink wrench can allow the plumber to reach tight areas under sinks and elsewhere. These fixtures come in a variety of lengths and sizes, as a wrench that’s too long or too short won’t fit under the sink or reach the fasteners.

Most sink wrenches share the same basic structure which consists of three components. The main body of these wrenches typically consists of a cylindrical metal rod. One end of the bar terminates in a cam jaw which will typically have serrated teeth to assist in gripping a fastener. The cam allows the jaw to tighten when it is rotated around a fastener either clockwise or counterclockwise, depending on how it is oriented. This jaw can be mounted directly to the bar, or it can be connected to a joint which allows lateral movement when working the wrench in confined spaces.

The other end of the bar typically terminates in a method used to grip and rotate the sink wrench, such as a perpendicular T-bar. If the sink wrench uses a T-bar, it may be fixed in place or able to slide back and forth through the main shaft. Designs that allow the T-bar to slide back and forth can offer additional leverage when breaking loose connections that are particularly tight. This type of design can also make it easier to negotiate tight conditions under a sink.




Protect your devices with Threat Protection by NordVPN


Skip to content