What’s a Spud Bar?

Print anything with Printful



A spud bar is a heavy metal bar used for various manual tasks, usually measuring between 5-6 feet long and weighing 12-15 pounds. It can break up hard surfaces, remove rocks, and start holes for fence posts. It is versatile and requires less space to use than a pickaxe.

Spud bars are simple bars used in many common manual tasks. In design, this tool is usually long, straight, and composed of a heavy metal that won’t break or bend under normal use. It can be used for a variety of purposes, making it both a simplistic and versatile tool.
In most cases, the spud bar will measure between five and six feet long. The weight of the instrument is usually around twelve to fifteen pounds. This makes it heavy enough to take advantage of the mechanical advantage when performing tasks, as it allows you to zoom in and apply the force exerted to the job at hand.

Sometimes referred to as a crowbar, the bar spud is most often employed as a device for breaking up a certain type of hardened surface. As such, it can be used to break through clay or hard ground for the purpose of clearing the way for a plow or shovel. It can also be used to remove rocks or other embedded objects from hard ground. During the winter months, ice anglers sometimes make use of a spud bar to punch a starter hole in the ice surface of a river or lake. The starter hole can be enlarged by other means and allow anglers to dangle their lines into the water below and enjoy the sport of fishing.

Variations of the spud bar can also be used in simple construction tasks. One with a flat chisel on one end may be ideal for helping to remove old shingles and tar paper in preparation for a roof replacement. This tool is also useful for removing siding sections from an exterior wall or leveraging concrete slabs to move them to another location. It is sometimes called a pilot hole digging bar, as it can be used to start holes for fence posts, making the job of hole diggers much easier.

One of the benefits of the spud bar is that the tool can perform many of the tasks normally associated with a pickaxe, yet requires much less space to use. Since there is no need to swing the bar before making contact with the intended surface, the tool can be used in relatively confined areas.




Protect your devices with Threat Protection by NordVPN


Skip to content