What’s a taper tap?

Print anything with Printful



A taper tap is a narrow cutting tool used to create a threaded hole in metal, wood, or plastic surfaces. It starts at a narrow point and gradually increases in size. The process is done by hand or with a hand tool. A T-wrench is commonly used. It is popular among construction workers and contractors. The need to counter-rotate the fixture to remove internal chips is a disadvantage. However, it is still used by professionals worldwide and often succeeds when conventional methods fail.

A taper tap is a narrow cutting tool that is used to produce a threaded hole in metal, wood or plastic surfaces so that a type of screw or bolt can later be placed into the drilled object. A tapered tap design starts at a narrow point and gradually increases in size to allow for a smooth, gradual cut. It is common for a taper tap to have between eight and 10 thread sections to maximize effectiveness against even very strong components such as alloy steel or iron.

This cutting motion is normally conducted by hand or with the aid of a hand tool to ensure balanced and accurate precision throughout the process. Once completed, the drilled surface is often followed by an intermediate or root tap to increase the total circumference of the tapped hole being created. One of the most common tools used in conjunction with a taper tap is a T-wrench as it distributes even pressure across the surface while adding the torque needed to maintain an accurate cut.

Tapered faucets are commonly used by construction workers and general contractors when power tool use is prohibited or otherwise unavailable. Others prefer them because the process ensures that a completely uniform section will be cut where other methods may falter. This method has been popular since the early 1800s, when workers created a conical spigot on the job site that was suitable for the task at hand. While more conventional methods are readily available, the conical faucet is still used by professionals around the world.

One of the disadvantages of operating a conical tap is the need to frequently counter-rotate the fixture to allow for the ability to remove internal chips. This process must be repeated frequently to release as much tension as possible to ensure a symmetrical hole is created, but each time the tapered tube tap is pushed out, the chances of failure also increase. For this reason alone, many beginners are asked to instead use a machine tool that provides enough torque to eliminate the need for frequent meter synchronization throughout the project. However, a conical faucet is usually found in almost any skilled craftsman’s toolbox, and often succeeds when more common conventional methods fail.




Protect your devices with Threat Protection by NordVPN


Skip to content