[ad_1]
A transverter combines the functions of an upconverter and a downconverter to manage the range of transmit and receive frequencies for communication purposes. It is commonly used by amateur radio operators to expand their range and reduce signal loss. It can also be used to create maximum efficiency in low frequency bands and in remote areas where other means of communication are impractical.
The transverter is a device that provides dual functionality when it comes to processing radio frequencies. In essence, the transverter combines the functions of an upconverter and a downconverter in one simple unit. Transverters work hand in hand with transceivers to manage the range of transmit and receive frequencies used for communication purposes.
One of the more common applications of the transverter is with amateur radio operators. The introduction of the transverter will allow the radio to expand its range beyond the HF and VHF ranges for which devices are normally manufactured to receive. Adding the transverter to amateur radio operation allows the device to also receive what is known as the intermediate frequency, considered a wider range than is encompassed by the HF and VHF bands. In some cases, the transverter may be equipped with automatic switching that allows for easy transmission and reception, although it is more common for this type of switching to require manual intervention. In reality, this type of manual switching can sometimes be preferable, such as when amplifiers are used during operation.
The transverter is usually installed on the radio tower, or other structure which is used as a support mechanism for the antenna which is attached to the radio. Choosing to install the transverter as close as possible to the antenna has a very simple purpose. If the transverter is in close proximity to the antenna, this will help reduce the amount of signal loss that may occur in the transmission line.
Another common use of the transverter is to create situations where the frequency of the transceiver is higher than that of the transverter. This allows for maximum efficiency in the use of the low frequency bands employed by radio amateurs. In several locations around the world, experimental stations using amateur radio for their broadcasts use the same approach. A transverter can also be an excellent addition to amateur radio equipment for use in remote areas where point-to-point communications by other means are difficult or impractical.
[ad_2]