An oscillating sander is a heavy machine used for sanding different floor surfaces. It removes old finish or polish and requires preparation of the area. Changing the grade of sandpaper is important and one should consider the area to be sanded before selecting a sander.
An oscillating sander is a machine with a large flat sanding surface built into the base of the unit. This type of sander is used to sand different floor surfaces, from hardwood to patio desk flooring. The term oscillation refers to the motion of the sanding surface, which moves in an orbital pattern.
An oscillating sander weighs 45 to 68 kilograms (100 to 150 pounds). Floor restoration services and hardwood flooring installers commonly use them to complete their projects. An oscillating sander can be very effective in removing old finish or polish from the floor surface. Changing the grade of the sandpaper allows the sander to remove shallow cuts and superficial damage to the floor.
When using a sander, it’s important to prepare the area first. This type of sander does not have a debris retention system, but leaves it on the floor surface. If you’re using the sander in a home, all doors and windows should be covered in plastic and taped to reduce the spread of sanding dust. All furniture must be removed from the room so that the floor is completely open.
Start in the far corner of the room and work in straight, even lines to remove the layer of polish. Once you’ve covered the entire room, stop and sweep away the debris. Take a close look at the surface of the floor and determine how many passes with the sander will be required to restore the floor. Resist the temptation to focus on one specific point. The sanding process removes real wood from the floor, and too much care in one area will result in an uneven floor.
Change the grade of sandpaper on your oscillating sander to match the level of material you need to remove. Make as few passes as possible and follow a simple pattern to ensure smooth sanding. Stop and clean the floor after each pass and take the time to inspect the floor closely.
There are several types of oscillating sanders, ranging from professional grade to low-cost models. When selecting an oscillating sander, consider the area you want to sand and how often you expect it to be used. For home renovations, look into renting a sander rather than buying one. Make sure you read the instruction manual and follow all steps carefully. A sander is a large, heavy machine and can easily cause a significant amount of damage.
Protect your devices with Threat Protection by NordVPN
