Corrugated iron is a versatile building material used for roofing, wall cladding, and sub-floors. Its corrugations provide strength and resistance to bending, while galvanized iron resists rust. It can be found in virtually every country and is easy to install with silicone sealant. Its simplicity and ease of maintenance make it a popular choice for many construction projects.
Corrugated iron is found in wall cladding and roofing materials worldwide. The iron, which is found in large square plates, is made up of bumps and dips to give the iron resistance to bending. Corrugated iron can be easily positioned by placing one of the raised ridges of one sheet over the raised ridge of another sheet. The ridges align the two sheets perfectly, and the low flat spots on the sheets provide an area to nail or screw when taping the sheet into place.
Some types of heavy corrugated iron are used as a sub-floor when pouring concrete. This type of iron is typically welded in place. The corrugations allow the floor to be structurally sound as the iron provides resistance to bending and collapsing under the weight of the concrete. Corrugated iron can be found in virtually every country in the world and in nearly every type of building imaginable.
While some types of corrugated iron are commonly referred to as corrugated tin, the actual materials used in making the sheet metal are extremely thin rolled iron. There are, however, many different types of iron sheets produced in the corrugated line. One of the most used variants of the product comes in the form of galvanized iron. This product resists rust and is used in the harshest climates.
While corrugated iron is best known for its use as a roofing material, many buildings are assembled entirely from this versatile material. The ability to shed rain, its waterproof characteristics make it a weather resistant building material. As the sheets are overlapped, a small bead of silicone sealant is applied to the joint, thus creating a wind and waterproof seam. The hereditary strength of corrugated sheets requires fewer wall studs and ceiling joists when constructing a small shed or outbuilding.
Sheets are one of the oldest known man-made veneering materials in existence. Its use can be dated back to the 1800s in Great Britain, where it was first made and patented. The simplicity of the design and the ease of application make it the perfect product to be used in the assembly of prefabricated buildings. Ease of maintenance, requiring nothing more than washing away any debris with water, makes it a great choice for many construction projects.
Protect your devices with Threat Protection by NordVPN
